FIRMWARE FLASH 2016

Saturday, March 26, 2016

FIRMWARE GSTAR P21 FLASH TOOL

Download firmware stock rom Gstar P21
Download Flash Tool DOWNLOAD DISINI
Driver bila belum punya instal dulu driver mtknya
Untuk tutorial flash via Flash tool bisa dilihat DISINI

Log read Flash Firmware Gstar P21

Start at : [3/22/2016 / 9:21:19 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 009800BC009000660076001600080000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

[Read Ok] : preloader_vanzo72_wet_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache_empty.img
[Read Ok] : usrdata_empty.img

[ScatCFG] : MT6572 / V1.1.1 / vanzo72_wet_lca / NAND
FW Size : 221 MiB
Scatter saved to : G:\andro3\gstar\gstar p21\MT6572__NAND__vanzo72_wet_lca

Done!
Elapsed: 00:02:44
Reconnect Power/Cable!

Finish at : [3/22/2016 / 9:24:04 PM]

Menghapus BlackBerry Protect Z10

BlackBerry Protect Z10

Hali ini bisa terjadi jika BlackBerry Anda menjalankan BlackBerry 10 OS versi 10.3.2 atau yang lebih baru, BlackBerry Protect dirancang untuk memberikan perlindungan anti-pencurian untuk perangkat.
Saat Anda mengaktifkan BlackBerry Protect di perangkat, orang lain tidak bisa melakukan yang berikut ini tanpa mengetahui BlackBerry ID Anda.
Anda dapat mematikan fitur anti-pencurian dengan mematikan BlackBerry Protect di perangkat. Anda harus memasukkan BlackBerry ID untuk mematikan BlackBerry Protect. Anda juga bisa mematikan fitur anti-pencurian dengan menghapus perangkat dari akun BlackBerry Protect, kecuali perangkat ditandai sebagai dicuri.
Sehingga apabila BlackBerry Protect dihidupkan dan ada seseorang yang mencoba menyetel perangkat Anda dengan BlackBerry ID yang berbeda, perangkat menjadi tidak dapat digunakan.

Mohon digunakan dengan bijak, jangan digunakan pada perangkat Blackberry hasil curian, karena resiko anda akan tanggung sendiri.
Sewaktu BB Z10 fitur perlindungan anti pencurian aktif maka anda hanya akan mentok pada menu email dan password seperti gambar dibawah ini:

Karena anda lupa email maupun password anda tidak akan bisa masuk ke menu. Untuk bisa mengaktifkan kembali blackberry Z10 anda maka harus melakukan flashing. Banyak yang share tentang bagaimana membuka anti thief blackberry 10. Tapi saya hanya share yang telah beberapa kali saya coba dan sukses pada Blackberry Z10 STL100-1.

Disini saya hanya membahas Blackberry Z10 STL100-1
Berikut langkah-langkah dan juga bahan yang digunakan untuk mengaktifkan kembali Blackberry Z10 STL100-1 anda:

Bahan :
1. File Autoloader Blackberry Z10 STL100-1 khusus buat anti thief. Karena file sebesar 3.06GB saya part menjadi 5 part via mediafire:

2. Download driver Blackberry Z10 STL100-1 (minimun xp sp3, install driver only)

3. Download Darcy's BlackBerry Tools buat install aplikasi bb10

Langkah-langkah
1. Install BB LINK dan install driver only

2. Klik AutoLoader_Z10S-TL100-1 ke1.exe colok Z10 anda ke kompi anda (proses flash ke-1 ini berguna agar bb anda tidak mengalami red blinking waktu terdowngrade)

3. Hidupkan BB Z10 anda, BB masih terkunci

4. Flash lagi menggunakan AutoLoader_Z10S-TL100-1 ke2.exe

5. BB Z10 anda sudah tidak terkunci lagi, silahkan lakukan wiping

6. Blackberry Z10 anda hanya memiliki menu yang sedikit, maka aplikasi blackbeery anda dengan Darcy's BlackBerry Tools
contoh sebelum diaplikasi :

setelah diaplikasi :

7. Done

CARA FLASH ADVAN S5E FLASH TOOL

Banyak sekali variant dari Advan S5E, ada plus, pro, new dan lain-lain. Disini saya upload firmware advan S5E sesuai build numbernya. cek di sticker back casing, karena bila tidak cocok, hape advan anda akan mengalami brick, seperti bootloop, blank lcd, malah juga matot.

Firmware yang saya upload disini semua flash menggunakan SP Flash tool.

1. ADVAN S5E NEW Build no: TCK5022A/G308-A2/KITKAT 4.4
DOWNLOAD

2. ADVAN S5E Pro Build no: S12 (LT) -V1.1-JB 4.2.2
DOWNLOAD G1
DOWNLOAD G2

3. ADVAN S5E Build no: S2-B2-JB4.2.2
DOWNLOAD

4. ADVAN S5E Build no: S2-ICS 4.2.2
DOWNLOAD

5. ADVAN S5E Build no: S2-K1-J.B4.2.2.G
   DOWNLOAD V0.4
     DOWNLOAD V0.4 ii
     DOWNLOAD V0.2

6. ADVAN S5E Build no: S2-K1-J.B4.2.2
    DOWNLOAD V0.4

7. ADVAN S5E+ Build no: S5 V2.3-JB 4.2.2
    DOWNLOAD

8. ADVAN S5E Build no: S18(LT)-V1.1-JB4.2.2
    DOWNLOAD v1
    DOWNLOAD v2

Lainnya :

Download Flash Tool DOWNLOAD DISINI
Driver bila belum punya instal dulu driver mtknya
Untuk tutorial flash via Flash tool bisa dilihat DISINI

Sumber : http://kangsuper.blogspot.com/2016/03/firmware-advan-s5e-build-no.html

Firmware mito A77 Kitkat dan Jelly bean

Buat yang salah versi jadi matot, ada dua versi JB dan KK, All tested OK, silahkan:

Download firmwarenya Mito A77 JB dan Mito A77 KK
Download Flash Toolnya DOWNLOAD DISINI
Driver bila belum punya instal dulu driver mtknya
Untuk tutorial flash via Flash tool bisa dilihat DISINI

Flash Mito A77 via SP Flash Tool

Video

Mito A77 JB

Mito A77 KK

Log read Mito A77 JB

Start at : [3/14/2016 / 5:58:21 PM]
Operation : Check / Read Info [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3557564D42012018D8463105
Initialize Memory ...
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVW5
[eMMC] : FLASH_CID : 1501004B3557564D42012018D8463105
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 882AB435C79BA997BE85020EE4D34BFD
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : MITO
ProdName : ratech72_wet_rlk_jb3
ProdModel : MITO A77
Device    : ratech72_wet_rlk_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

EXTRA :
LCD [0] : sh1282_dsi
LCD [1] : rm68171_dsi
LCD Res : 854x480
TOUCH [0] : ft5206
CAM [0] : ov5650_mipi_yuv
CAM [1] : gc0329_yuv
MODEM : ratech72_wet_rlk_jb3_hspa_2band
LOCALE : in_ID zh_CN en_US hdpi

Done!
Elapsed: 00:00:13
Reconnect Power/Cable!

Finish at : [3/14/2016 / 5:58:34 PM]

Start at : [3/14/2016 / 6:34:52 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3557564D42012018D8463105
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVW5
[eMMC] : FLASH_CID : 1501004B3557564D42012018D8463105
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : MITO
ProdName : ratech72_wet_rlk_jb3
ProdModel : MITO A77
Device    : ratech72_wet_rlk_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_ratech72_wet_rlk_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / ratech72_wet_rlk_jb3 / EMMC
FW Size : 678 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__MITO__MITO_A77__ratech72_wet_rlk_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:03:38
Reconnect Power/Cable!

Finish at : [3/14/2016 / 6:38:30 PM]

Log read Mito A77 KK

Start at : [12/22/2015 / 6:39:40 PM]
Operation : Check / Read Info [ v1.39 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3558564D42017A4FD685411D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX5
[eMMC] : FLASH_CID : 1501004B3558564D42017A4FD685411D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : MITO
ProdName : ratech72_we_72_rlk_kk
ProdModel : A77
Device    : ratech72_we_72_rlk_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_1_wg_n

EXTRA :
LCD [0] : sh1282_dsi
LCD [1] : rm68171_dsi
LCD Res : 854x480
TOUCH [0] : ft5206
CAM [0] : ov5650_mipi_yuv
CAM [1] : gc0329_yuv
MODEM : ratech72_we_72_rlk_kk_hspa
LOCALE : in_ID zh_CN en_US

Done!
Elapsed: 00:00:24
Reconnect Power/Cable!

Finish at : [12/22/2015 / 6:40:05 PM]

Start at : [12/28/2015 / 6:10:19 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 3 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3558564D42017A4FD685411D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX5
[eMMC] : FLASH_CID : 1501004B3558564D42017A4FD685411D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand     : MITO
ProdName : ratech72_we_72_rlk_kk
ProdModel : A77
Device    : ratech72_we_72_rlk_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

[Read Ok] : preloader_ratech72_wet_rlk_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / ratech72_wet_rlk_jb3 / EMMC
FW Size : 687 MiB
Scatter saved to : G:\andro3\mito a77\MT6572__MITO__A77__ratech72_we_72_rlk_kk__4.4.2__ALPS.KK1.MP6.V1\

All done!

Done!
Elapsed: 00:03:47
Reconnect Power/Cable!

sumber : http://kangsuper.blogspot.com/2016/03/flash-mito-a77.html

firmware Vivo Y22 Flash tool

Device Brand   : vivo
Device Model   : bbk82_wet_jb5
Device CPU     : MT6582
Device IntName : bbk82_wet_jb5
Device Version : 4.2.2
Device Compile : 9/20/2014 2:32:15 PM
Device Project : ALPS.JB5.MP.V1.6
Device ExtInfo : vivo Y22
Supported BootLoader HW :
FlashID [0] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
FlashID [1] CID : 110100303034473930 , Name : 004G90 , Vendor : 11 , [TOSHIBA]

Flash Vivo Y22 SP Flash Tool, Firmware Vivo Y22 SP Flash Tool.

Firmware Vivo Y22 Bahasa Indonesia flash menggunakan SP Flash Tool, Tested.

Bahan:

Download firmware Vivo Y22
Download Flash Tool DOWNLOAD DISINI
Driver bila belum punya instal dulu driver mtknya
Untuk tutorial flash via Flash tool bisa dilihat DISINI

Flash Vivo Y22 via SP Flash Tool

Video Flashing Vivo Y22

CARA FLASH OPPO R1201 FLASH TOOL

Device Brand   : OPPO
Device Model   : 1201
Device CPU     : MT6582
Device IntName : 1201
Device Version : 4.4.2
Device Compile : 10/20/2015 6:10:57 AM
Device Project : 1201EX_11_A.11_151020
Device ExtInfo : 1201

Flash Oppo R1201 menggunakan SP Flash Tool, cukup mudah dan simpel, flashing dilakukan bila hp Oppo R1201 anda mengalami kerusakan software seperti, bootloop, terserang virus, atau bahkan matot. Flashing cukup menggunakan Tool gratis, cara flash Oppo R1201 menggunakan Sp Flash tool.

Bahan:

Download firmware stock rom Oppo R1201
Download Flash Tool DOWNLOAD DISINI
Driver bila belum punya instal dulu driver mtknya
Untuk tutorial flash via Flash tool bisa dilihat DISINI

Flash Oppo R1201 flash tool

Oppo R1201 Hardware Information:

Modem Version : OPPO82_hspa_15066
Localization : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG th_TH pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB
DisplayRes    : 854 x 480

Supported LCD :
qhd_hx8389_13059
qhd_dsi_vdo_tianma

Supported DGT :
ft5346

Supported CAM :
imx179_mipi_raw
s5k3h7y_mipi_raw
hi258_mipi_yuv

Supported BootLoader HW :
FlashID [0] CID : 1501004B4A5330304D , Name : KJS00M , Vendor : 15 , [SAMSUNG]
FlashID [1] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
FlashID [2] CID : 90014A483847326404 , Name : H8G2d , Vendor : 90 , [HYNIX]
FlashID [3] CID : FE014E50314A39344C , Name : P1J94L , Vendor : FE , [MICRON]

Log read Flash Oppo R1201

Start at : [3/15/2016 / 10:32:38 PM]
Operation : Read Flash [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040502A200F262D3
Initialize Memory ...
DRAM configured from IDB!
DRAM initialize passed!
DRAM size : 0x40000000
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040502A200F262D3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 60FB459B4D8F31FE994739284A229A15
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...
USBDL : Init HSUSB Ok!

Brand     : OPPO
ProdName : 1201
ProdModel : 1201
Device    : 1201
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : 1201EX_11_A.11_151020

[Read Ok] : preloader_oppo82_15066.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / oppo82_15066 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1619 MiB
Scatter saved to : G:\andro3\OPPO\MT6582__OPPO__1201__1201__4.4.2__1201EX_11_A.11_151020\

All done!

Done!
Elapsed: 00:06:51
Reconnect Power/Cable!

Finish at : [3/15/2016 / 10:39:30 PM]

sumber : http://kangsuper.blogspot.com/2016/03/flash-oppo-r1201.html

FIRMWARE STOCK ROM GSTAR P21

Firmware Gstar P21 dan tool:

Download firmware stock rom Gstar P21 DOWNLOAD DISINI
Download Flash Tool DOWNLOAD DISINI
Driver bila belum punya instal dulu driver mtknya
Untuk tutorial flash via Flash tool bisa dilihat DISINI

Flashing Gstar P21 Flash tool